Accessories for the MAGNUM
Most of the accessories made for the Greenspeed GT and GTO trikes will fit the Magnum, although there are a number of exceptions. Descriptions and photos follow. Please click on the thumbnails for larger photos.
The GT Series II MIRROR/ACCESSORY clamps will fit the Magnum kingpin posts, and should be used with the longer (230 mm) GTO mirror/accessory posts. The kingpin inclination on the Magnum, is 22 degrees, V 24 degrees the Series II GT1, GT3, and GT5, thus the mirror posts will sit 2 degrees more upright than on the GTs, at 12.5 degrees to the vertical. The small kingpin clamp should be removed before fitting the larger accessory clamp. The clamp should fitted close to the wheel, and with the side facing up which has the greatest distance between the two holes as show below. This mirror post is designed to accept the Mirrycle mirror, as shown.
Accessory clamp, long post, and mirror.
|To aid getting in and
out of the trike, the Greenspeed (GS) bar end type "GRAB
HANDLES" also work perfectly with accessory posts
on the Mangum, and the mirrors can be remounted in the ends of
the Grab Handles, as shown below. The Grab Handles and/or
mirrors can be fitted on either or both sides, depending on
Grab handle on post with mirror.
|The tag on the top of
the front derailleur post is designed to accept direct
mounting lights as used with dynamo systems, so we also make a
LIGHT MOUNT which attaches to the tag to accept the
handle bar mounting lights, as used by many battery light
systems. These can be used singularly or in pairs to mount
double head lights, as shown below. 1st remove the front
reflector, and then the light mount can be fixed with the
Allen screw. To fit two, 1st put the screw inside one mount,
and then thread it through the tag and screw it in to the
other mount. A tail light can be mounted directly on the rear
seat cross stay, or on the adjustable seat stays.
Reflector on tag. Light mount on tag. Light on mount.
Fitting two light mounts. Two lights fitted. Tail light fitting.
handy GS accessory, is the COMPUTER MOUNT. And for the Magnum,
this accessory has been upgraded and strengthened from the
TWIST GRIP MOUNT we were using for the GTO Touring Trike and
GTT Tandem Touring Trike, to take the SRAM DualDrive three
speed hub twist grip shifter. So this in now called the ACCESSORY
MOUNT and it has been especially modified to mount the
front mudguards (FRONT FENDERS) on the Magnum, so that
it suits the camber of the front wheels. However it is longer
than the computer mount, so it will also suit various GPS
units, and can be used in a variety ways, both on the
ACCESSORY POSTS and on the LIGHT MOUNTS as shown below.
For detailed front mudguard fitting instructions, click here.
Mounting computer or GPS
standard GT/GTO/GTT Greenspeed HEADREST, designed for
the 3/4" Cro Mo seat tubes can also be used with the
Magnum 1" alloy seat tubes with the addition of two
sizing sleeves available from Greenspeed dealers. When fitting
the head rest, make sure that threads of the fixing bolt are
greased, and that the fixing wedge is inside the split sleeve.
The head rest is adjustable both up and down and fore and aft,
and is designed to fit the nape of your neck, so that it does
not interfere with a helmet. Plus they have have flag mounts,
as the arms block the seat flag mounts. New Magnum specific headrests,
with larger diameter alloy tubing were be available from June, 2012.
Headrest pack, and headrest mounted.
Mo 4130 LUGGAGE RACKS for the Magnum were available
from MAY 2012. These racks will fit the M6 dropout eyes, and
attach to the Q/R clamps on the seat stays, using longer
screws. They are rated at 40 kg, or 88 lbs. Other GS racks
will not fit. Special alloy Magnum racks with 1/2" tubing
and same weight rating were available from December 2012. More
information and fitting
instructions on the Cro Mo racks here.
instructions for Alloy Racks here.
Cro Mo Rack. Alloy Rack.
Chain Gobblers made especially for the Magnum trikes are
now available. These Chain Gobblers are a special device which
automatically adjusts the chain length as the crank extension
is moved in or out to adjust for different leg lengths. This
is useful if there are people with different leg lengths who
want to ride the same trike. They are particularly useful for
dealers, as what used to take 10 minutes to adjust the chain
length for different riders, can now be done in less than ten
Magnum Chain Gobbler